Kenmark Air Cooling & Heating Partners With Award Winning Patented Aeroseal Technology For Groundbreaking Duct Repair Solutions In Southwest Florida

Fort Myers, FL (PRWEB) December 19, 2011

Kenmark Air Cooling & Heating of Southwest Florida is proud to announce the inclusion of the patented Aeroseal duct sealing technology as a fast and cost effective method for lowering utility costs, saving energy and improving indoor air quality for homeowners in Southwest Florida. Kenmark?s Aeroseal of SWFL is a cutting edge process that tackles leaks in air duct systems and seals them through a computer-controlled injection of aerosol mist particles. The technology was developed at Lawrence Berkeley National Laboratory and funded by the U.S. Environmental protection agency, U.S. Department of Energy (http://www.energy.gov), the Electric Power Research Institute, and California Institute of Energy and Environment with efforts to potentially save Americans an estimated $ 5 billion a year on cooling and heating costs. The cutting edge duct sealant process puts escaping air under pressure and causes the mist to stick first to the edges of a leak, then to each other until the leak is closed. Its ability to seal leaky air ducts is saving homeowners up to $ 850 per year on their home energy bills.

Aeroseal was selected as one of this year?s best new home products in ?This Old House magazine?s Top 100 Best New Products awards. The process also won the ?Best of What?s New? award from Popular Science magazine, and the ?Energy 100? award from the U.S. Department of Energy (DOE). As stated by Aeroseal.com, ?The DOE also rated the Aeroseal duct sealing process as one of the 23 most beneficial technologies available to American consumers that has come out since the agency was created.?

?Duct leaks are not a do-it-yourself project. They can be hard to find or costly to seal with older or conventional, less effective methods other than the Aeroseal process. We are here to educate homeowners and help them improve the cost-effectiveness of their HVAC system,? say?s Ken McDaniel, President of Kenmark Air. ?If your energy bills seem high, your home is dusty, the rooms in your house are different temperatures or the quality of your indoor air is poor; studies show that the Aeroseal duct sealing process is the most effective solution for combating these problems and plays a critical role in saving energy and money in your home or office,? McDaniel concludes.

For more information about Aeroseal technology solutions, call Kenmark Air at (239) 437-7040 or visit http://www.KenmarkAir.com. Kenmark Air is located at 5811 Country Lakes Drive, Fort Myers FL 33905

# # #

Find More Save Money On Electric Bill Press Releases

Alternative Solutions for Saving Money on Your PECO Electric Bill

Most of us have heard of ways to save money on electricity. Installing a solar unit for your roof and buying energy-efficient appliances are two popular means of reducing your PECO electric bill. These large-scale improvements can cost a lot of money, though. If you’re looking to save money on electricity without breaking the bank, here are a few little-known tips that will lower your bill and make Mother Nature smile.

Choose Your Energy Provider

A new movement in many states throughout the country is called electricity deregulation. In a nutshell, electricity deregulation lets the homeowner choose his or her energy supplier and the price they’re willing to pay for electricity. Prior to electricity deregulation, homeowners had just one choice – their local utility company.

Electricity deregulation opens the industry and allows for more competition among private energy suppliers, and that equals more savings for homeowners.

Enhance Energy Efficiency in Your Home

Another great way to save money on your PECO electric bill is to increase energy efficiency in your home. You can do this by taking the following three actions.

* Regularly Inspect Appliances: Like all machines, home appliances, including heat pumps and AC units, should be inspected every year. A leak in an air duct, for instance, can drastically reduce a unit’s efficiency and cost a PA homeowner extra cash.

* Clean Filters: We all want to inhale clean air in our home, and blocked air filters make a unit work much harder to filter air pollutants.

A super-cheap but helpful way to save money on electricity in your Pennsylvania home is by replacing your filters.

* Purchase AC Units that are the Correct Size: If your home is on the small side, you’re better off purchasing a modest air conditioning unit that won’t overpower the space. There’s no need to expend unnecessary electricity to power a unit too large for your home.

* Seal Windows and Doors: Poor insulation always results in decreased efficiency. With this awareness, we should all take the basic steps to properly seal any cracks along door and window frames. Why continue to waste the cold or warm air that’s costing money?

When You’re Sleeping, Put Your PC to Sleep

There is a long-running debate over whether or not to turn off your computer when it’s not in use. Some skeptics claim that repeatedly turning your computer on and off can harm the machine, despite studies showing that turning off your computer at night actually extends the computer’s life.

If you still don’t want to turn off your computer at night, there is a compromise. Nowadays, many computers have a sleep mode that uses much less power than the normal mode. Using the hibernate mode can save over 75 dollars a year on electricity.

To save the most energy, turn off and unplug your computer when it’s not in use.

ShopForEnergy.com is an energy comparison site that helps energy consumers large and small find the best PECO electric rates.

How to Save Money on Your Electrical Bill

For a long time I’ve been hearing and reading that home electrical devices, even though not used, when plugged in, still draw a lot of energy. I didn’t quite understand that concept until one day I set out to put it to a test.

At that time, my electrical bill was around 2 every month.

I made an inventory of every electrical device in my house that was plugged into an electrical outlet all day and night.

So, on the day of my next billing cycle, and thereafter, I started doing the following:

I unplugged two table lamps that were rarely used and plug them in only when needed.

I would unplug two baby monitors when not in use.

I would unplug two night lights during the day.

I combined the TV, DVD, TV Digital Box, and all other entertainment devices and plugged them into one surge protector with enough outlets to fit them all.

When not in use, and overnight, all I had to unplug was one cord and they all were off.

I combined the computer, printer, modem, and all other computer related devices same way as the TV gadgets and unplug them all when not in use.

I would make sure coffeemaker, toaster or other kitchen devices were unplugged when not in use.

Also, every time we would leave the house, I’ll do a final walk-around to make sure there was no forgotten light on, and all of the above were unplugged.

After doing this meticulously every single day, my next month electrical bill was .

Six months later, I’m still doing this every single day and my electrical bill is floating around every month. That is of savings every month.

For earth day, it was suggested to turn off all lights to save the planet.

My wife tells me that I do “earth day” every single day.

Now that you can see how to lower your electrical bill, you can save some money and save the planet. Go for it!

Health Alert! To see how your health is being compromised with products you use and consume daily, please visit http://www.myproductalert.com

RedCore Launches First Infrared Electric Stove Heater on the Market

Santa Ana, CA (PRWEB) December 19, 2011

RedCore has added a new electric fireplace stove to its popular line of space heaters this season. Leading the wave in new infrared technology is the Redcore 15602 S-2 infrared electric fireplace stove heater, which is the first stove heater to offer energy-efficient radiant heat. It is a great portable unit that gives customers a green heating solution with a ton of personality.

The Redcore 15602 S-2 infrared electric fireplace stove is designed to look like an old-fashioned wood burning stove. Instead of firewood, however, customers use dial controls for instant radiant heat with a burst of light effect flames. They get atmosphere and warmth without the mess or hassle. This infrared stove also requires no permanent installation and plugs into any standard outlet.

Infrared radiant heat is the top of the line in heating solutions because it works instantly, silently and cleanly. Infrared rays warm objects directly so there is no heat loss or blowers to disturb the air. Infrared heaters are a great way to efficiently heat only the rooms being used, saving users money on their utility bills.

The Redcore 15602 S-2 infrared electric fireplace stove heater comes in a matte black finish that will complement any decor. Even though the Redcore 15602 S-2 has a compact and space-saving design, it is still powerful enough to heat to rooms up to 750 square feet.

Key Features and Benefits:

120V system operates on both 750 and 1500 watts
PTC infrared element with lifetime warranty on heating element
Independent on/off switches for heat and flame effect
Flame intensity control lets you adjust the flickering flames
Adjustable thermostat provides personalized comfort
Safe to use with CSA certification

Redcore?s new stove heater is ideal for large bedrooms, living rooms and small apartments. It provides the charm of a wood-burning stove with the safety and convenience of an electric space heater, making it the ultimate in heating comfort.

The Redcore 15602 S-2 is offered at an affordable price exclusively through the authorized online retailer Air-N-Water.com.

Air & Water is one of the nation?s largest independent retailers of home appliances and heating/cooling products. Go green and join the infrared revolution with the new Redcore 15602 S-2 infrared electric stove heater

###

APowerCompany.com Reveals Money Saving Tips for Consumers, Businesses, and Power Companies

Connecticut (PRWEB) December 15, 2011

APowerCompany.com partners with local utility companies in an effort to lower energy cost for consumers, businesses and power companies. APowerCompany.com gives home owners and businesses the ability to lower their energy costs without change or time. This capability provides all of the same energy services at a lower rate. The reason A Power Company is able to do this is because electricity has been deregulated in 17 states to increase competition and lower electric prices. APowerCompany.com allows consumers to lower their current electricity bill with all the same reliability. APowerCompany.com provides a service to keep all of your current services in place but gives consumers that ability to lower electric bill by changing the rate they pay.

Money Saving tips, Energy Deregulation = Decreased Power Rates.

Top Kansas City Handyman Offers Special Winter Discounts to Help Homeowners Save Money on Utility Costs

Kansas City, MO (PRWEB) December 09, 2011

JW Handyman Services, LLC is offering special winter discounts to help homeowners save money during this difficult economy. With a stellar rating with the Better Business Bureau, clients can be assured this company is trustworthy with a solid reputation for quality work and excellent customer service.

The company is literally a one-stop shop for the convenience of their clients. Their services include carpentry, electrical, plumbing, remodeling, home repairs, new construction, room additions, sheet rocking, tile, decks, and much more.

?We do all jobs large and small, from repairs to complete home remodeling and restoration,? says owner James R. White. ?We take pride in our work assuring customer satisfaction and are willing to negotiate labor prices to work within a customer?s budget.?

With temperatures dropping, JW Handyman Services, LLC also helps homeowners save money on heating costs and avoid problems, such as frozen pipes, by winterizing homes. A few items to keep in mind:

Adding adequate insulation remains one of the best ways to keep heat under the roof. For example, adding insulation to an attic is an easy and relatively inexpensive way to keep more warmth in a house and save on heating bills.

Plumbing is especially susceptible to cold weather and freezing. In fact, burst pipes can cause some of the most expensive repairs in a home. Insulating exposed pipes can help prevent this disaster from occurring.

Draining a hot water heater is one of the most important, and often times overlooked, maintenance procedures. Draining three to five gallons every three to six months will remove harmful sediments that can compromise the energy efficiency, performance, and life expectancy of the water heater and prevent discoloration of the water. Keep in mind, during winter months heating elements must work twice as hard with colder water which increases wear and tear.

To learn more about JW Handyman Services? winter discounts and services, please call (913) 306-4794 or visit them on the Web.

About JW Handyman Services, LLC

JW Handyman Services, LLC is owner operated, licensed, and insured and has earned an A- rating with the Better Business Bureau. Their services include carpentry, electrical, plumbing, remodeling, home repairs and more. They have quickly built a reputation for quality work, dependable service, and reasonable prices. They serve Kansas City and the surrounding area.

###

How to Save Money on an Electricity Bill

1- Purchase a programmable thermostat. They are cheaper than you might think, and they can reduce up to 30% on your heating and cooling costs. They work harder when family members are home and keep the house a bit less heated or cooled when they are not. You can program your air conditioning, for example, to stay at 80 degrees from 9:00 a.m. until 4:00 p.m. Switch it down to 76 degrees right before you get home from work.

2 – Buy ceiling fans, especially for stuffy or poorly ventilated rooms.

Fans make the room feel cooler in the summer and warmer in the winter. They are very low-cost to own and operate.

3 – Buy CFL (compact fluorescent lamps) light bulbs. They use 75% less energy than normal light bulbs and last up to 10 times longer. They are a little more expensive initially, but the energy cost savings and longevity are worth the initial outlay.

4 - Choose Energy Star appliances when you upgrade your stove, refrigerator, hot water heater, etc. Older appliances are energy-sucking monsters, so when the time comes to replace them, you can see a substantial energy savings.

5 – Get a hot water heater “jacket.” These insulating wraps that go around the outside of your water heater help keep the water temperature higher, especially in the winter, thus reducing how hard your heater has to work and the resulting energy costs.

Consider turning down the temperature on your hot water heater or purchase a newer “tankless” water heater, which uses less energy than the standard models.

6- Be careful about the energy that you consume. Turn off lights and other appliances when you are not using them. Use dimmers or lower wattage light bulbs. Air dry your clothes. Use a toaster oven instead of heating up the regular oven for small items.

7 – Become solar-friendly. Use skylights, open windows instead of turning on lights and consider installing solar panels.

I HIGHTLY recomment you a new technology,new device call “Nikola Tesla Secret” .Exposing Tesla’s “FREE Energy” Device. Discover How to Use a 100 Year Old Device to Throw Your Electricity Bill Out the door. Tesla’s Secret Device is a proven and effective way of generating FREE Electricity – and help the Environment.Click to explore the big bonus from Nikola Tesla Secret Website

Find More Save Money On Electric Bill Articles

How to Save Money on Utility Bills – Use Less Energy and Save More Money

Article by James Jansen

Energy prices are only going to continue to go up and up. If you rely on fossil fuels in any way you will be interested in knowing how to save money on utility bills.

You will be relieved to know there are a lot of simple and inexpensive things you can do to reduce the amount of money you use on the various utilities that have become indispensable for us in the modern industrialized world. Here is a list of things you can do to save on heating, cooling, lighting and electrical appliances.

1. Heating and Cooling

All of these are notorious for burning up a lot of energy and increasing your bills.

You ought to be using a natural gas water heater if you are not already. These things are great and they use a mere 50% of the energy that a conventional water heater does.

Take advantage of methods to cool down your house naturally. If you can plant trees on the east and west of your home. The shade they provide will keep your house up to four degrees cooler in the summer by reducing the amount of sun that hits your roof and windows. They will also act as a wind breaker in the winter to keep your house warm. You should investigate which kind of trees are suitable for the soil you have as some trees will have roots that will stretch under your house and undermine the foundations.

Make sure that you seal up all the cracks in your house where air leaks out. This is especially needed to stop warm air escaping in the winter. Be sure to seal any ducts, close the damper if you have a fireplace and turn of extractor fans when they are not necessary.

2. Lighting Tips

Use dimmers so you can adjust the brightness of the bulbs in your home. Only use them at the brightness you need for work. Use task lighting when you are working instead of trying to illuminate a whole area with a big overhead light.

For outdoor light use a timer or motion sensor to turn them on and off.

Use as much natural light as possible in your home. Thing about the design of your rooms and how you can direct more natural light into dark spaces. People don’t realize how to save money on utility bills sometimes as the solutions are not obvious. Consider installing skylights and using mirrors to reflect light.

3. Home Electronics

Did you know that over 60% of the power that electronic devices use is when they are on standby. That is a lot of energy to be wasting and so you should turn them off when you are not using them. All they do is flash the time at you in a green light. To make it easier you can plug multiple devices into an extension board and switch them all off together.

Turn off computers that are not being used. See above for the amount of juice they burn when on standby. At least set them to sleep or hibernate as this will use a lot less energy.

4. Appliances

Replace your refrigerator if it was manufactured before 1993. Due to efficiency regulations that came into place that year newer models use a lot less energy. In fact a simple old refrigerator could be sucking up 0 of electricity more than a new one.

If you use a dryer try to wash multiply loads on the same day. When you put a second load in the dryer you will use up residual heat. This is how to save money on utility bills.

If you are serious about putting more away each month and having an easier life then you must know how to save money on bills. It is an essential part of any plan to improve your situation and get the things you want.

Find More Save Money On Electric Bill Articles

Tips to Saving Money on Utility Bills

Article by Jason Koonce

New Text moduleRenewable Energy1. You will save hundreds of thousands of dollars over your lifetime, with immediate savings completely possible.2. You will be using RENEWABLE energy, your own renewable energy, so you can do your bit to save the planet3. The whole family can get involved! Build your turbines and panels with your kids and teach them something about the environment4. You would be in full control of your household expenses so there would be no more putting up with rising energy prices as and when they occur5. You can choose to go off grid so you don’t have to deal with the energy companies at all, or you can choose to use a little. It is completely your choice!6. This is THE cheapest way to build your own solar panels and wind turbines so you can literally make back expenses in no time.7. Make money FROM the energy companies by selling your left over electricity to them. This helps the environment of course but it also helps your bank balance!8. You control your energy sources. Make one solar panel, ten wind turbines or a combination of the two. Make as many as you like to generate your electricity.9. You can save money to help your household through hard economic times. You can also have peace of mind that you are doing your bit!New Text moduleRenewable Energy1. You will save hundreds of thousands of dollars over your lifetime, with immediate savings completely possible.2. You will be using RENEWABLE energy, your own renewable energy, so you can do your bit to save the planet3. The whole family can get involved! Build your turbines and panels with your kids and teach them something about the environment4. You would be in full control of your household expenses so there would be no more putting up with rising energy prices as and when they occur5. You can choose to go off grid so you don’t have to deal with the energy companies at all, or you can choose to use a little. It is completely your choice!6. This is THE cheapest way to build your own solar panels and wind turbines so you can literally make back expenses in no time.7. Make money FROM the energy companies by selling your left over electricity to them. This helps the environment of course but it also helps your bank balance!8. You control your energy sources. Make one solar panel, ten wind turbines or a combination of the two. Make as many as you like to generate your electricity.9. You can save money to help your household through hard economic times. You can also have peace of mind that you are doing your bit!http://www.squidoo.com/tips-to-saving-money-on-utility-bills

I am a tower dog. I have been working on cell phone towers for the better part of 2 decades, and now I’m trying my hand at article marketing. Wish me luck, thanks!!!

AU10TIX Announces New Machine-Learning System for Capturing & Authenticating Multi-Format Identifying Documents

Nicosia, Cyprus (PRWEB) November 26, 2011

AU10TIX Limited, a technology subsidiary of ICTS International B.V., announced the release of FDI 6.0 ? a new generation, front-end customer enrollment gateway that integrates the capture, authentication and integration of the widest range of identifying enrollment-documents and interfaces with biometric inputs. FDI 6.0. incorporates patented machine-learning technology that sets new standards in handling non-standard and off-standard documents and in fraud detection performance. Now enterprises and public service providers have a complete customer enrollment platform that combines fraud prevention with an enrollment-documents gateway for ECM/eDRM systems.

The Hidden Loopholes In Customer Enrollment

Anti-Money Laundering (AML), Anti-Terrorist Financing (ATF), and fraud prevention regulations mandate the positive identification, clearing and recording of customers prior to carrying out of a series of everyday actions such as opening an account, withdrawing funds, enrolling to a new program, etc. It is estimated that in this country banks, financial services, Telcos, and other enterprises and service providers handle thousands such applications and action cases every single workday. Amazingly, much of these actions are still done manually? Unskilled customer service representatives are required to identify hundreds of types of IDs, Passports, Driving Licences, and other primary and secondary identifying tokens. They need to authenticate identifying documents that contain dozens of possible security features unseen to the naked eye, and not included in electronic chips or magnetic stripes. And they need to record often difficult to comprehend data into the enterprise systems. It is estimated that up to 25% of customer records are riddled with typos, missing-data, duplicates, etc. In addition, tons of often illegible and almost impossible to track document photocopies are archived and shipped around. This already creates a huge cost-factor and operating efficiency problem that only aggravates the damages of fraud and customer handling inefficiencies, and creates imminent regulatory compliance issues.

Many enterprises already deploy elaborate fraud-preventions systems that analyze transaction traffic at the back-end to detect irregularities or detect suspicious persons. These systems are as effective as the data they have, and often come into play only after the actual interaction with the customer. This leaved the front-end as a potentially weak link.

Many enterprises already deploy elaborate ECM systems that transform paper-based customer management to an electronic-record base one. Since much of the identifying document traffic is still manually processed, their records are too often ?missing? or remain partial or inaccurate. This means that identifying document records are also a weak link in many ECM systems.

AU10TIX?s FDI 6.0 new offers a breakthrough in effective handling of identifying documents at the front-end both as fraud prevention layer and gateway to ECM systems.

Fdi 6.0 – Patented Machine-Learning Technology

Automated identity document authentication solutions are typically based on template recognition and dataset matching. Their effectiveness is dependent on their ability to read IDs, Driving Licenses, Passports, Visas, etc. that are often worn-out or that deviate from the official templates due to the use of different printer qualities, paper differences, etc. Older technologies are likely to have difficulties in reading or authenticating such documents, delivering false ruling or simply errors messages.

AU10TIX?s FDI 6.0 features new, patented algorithms that deliver far better document identification and forensics capabilities that translate to an ability to handle documents that other systems simply cannot. But even more than that, by incorporating smart machine-learning technology, FDI 6.0 is an auto-learning system that actually improves reading and ruling accuracy with every use!

AU10TIX?s FDI 6.0 has already been tested against a wide variety of ?problematic? documents and against other solutions, delivering superior performance in detecting even elaborate fraud attempts and handling non-standard and off-standard ocuments.

FDI 6.0 – Multi-Document Handling Capability

Typical document authentication systems handle primary identifying documents (IDs, Driving licences, Passports, etc.). The more sophisticated ones handle also secondary identifying documents (Visas, work permits, etc.). These documents are captured with specialized ?Passport scanners?. But in reality, customers are often requested to submit also supplementary identifying documents such as utility bills, council tax receipts, etc. These are much larger documents that can be scanned only with A4 or larger scanners, and these often use another application for processing.

With the introduction of FDI 6.0, AU10TIX, created a truly full-process, multi-document handling and integration platform. The new technology can process documents that have been scanned with anything from passport scanners to swipe scanners, from A4 scanners to scanner-copiers, and will in the near future even handle document scans ?from files? that originate in databases or web interfaces.

The ability to process the widest range of identifying enrollment documents, cross-match them and integrate them into a single customer record portfolio, is a real game changing breakthrough.

With FDI 6.0, enterprises and organizations have an end-to-end solution for fraud prevention and an ECM/eDRM gateway in one integrated, smart system.

Cost-Saving Meets Operating Efficiency And Regulatory Compliance

AU10TIX?s FDI 6.0 redefines ROI with a compelling business-case. With a new level of fraud prevention capacity, FDI 6.0 stops fraud at the front-end and thereby cuts fraud damages and enables long-term regulatory compliance.

At the same time, the system?s multi-document processing capability saves tremendous costs in material, work, logistics and archiving, and makes ECM truly encompassing. By eliminating data gaps, errors and duplicates, it boosts operating efficiency in real-time.

About AU10TIX

AU10TIX Limited is a leading provider of document authentication and personal-ID verification solutions for more than 20 years. The company develops, customizes and implements solutions for business-critical environments such as airports, financial institutions, points of sales and service, law enforcement agencies, etc. The company?s applications operate in more than 90 countries worldwide, with ca. 75,000 front-end installations. In recent years, AU10TIX had diversified its long-year specialization in security and aviation to banking and financial services applications. AU10TIX is partnered with Experian, Star Alliance, General Electric, and other global leaders is various industries.

For more details: http://www.au10tix.com

###

Ways To Save Electricity